2017 Omax Maxiem 2040 5 Axis CNC Abrasive Waterjet Cutting System
Waterjets, Waterjet Cutting%202017%20Omax%20Maxiem%202040%20Waterjet%20-%20Pic%204.jpg)
%202017%20Omax%20Maxiem%202040%20Waterjet%20-%20Pic%202.jpg)
%202017%20Omax%20Maxiem%202040%20Waterjet%20-%20Pic%203.jpg)
%202017%20Omax%20Maxiem%202040%20Waterjet%20-%20Thumbnail.jpg)
%202017%20Omax%20Maxiem%202040%20Waterjet%20-%20Pic%201.jpg)
%202017%20Omax%20Maxiem%202040%20Waterjet%20-%20Pic%204.jpg)
%202017%20Omax%20Maxiem%202040%20Waterjet%20-%20Pic%204.jpg)
%202017%20Omax%20Maxiem%202040%20Waterjet%20-%20Pic%202.jpg)
%202017%20Omax%20Maxiem%202040%20Waterjet%20-%20Pic%203.jpg)
%202017%20Omax%20Maxiem%202040%20Waterjet%20-%20Thumbnail.jpg)
%202017%20Omax%20Maxiem%202040%20Waterjet%20-%20Pic%201.jpg)
| Pump Output | 50,000 PSI |
| X-Axis Travel | 13.5' |
| Y-Axis Travel | 6.5' |
| Z-Axis Travel | 12" |
| Power | 30 hp |
X-Y Cutting Travel: 13’10” x 6’7”
Z-Axis Travel: 12”
Table Size: 16’1” x 7’0”
Material Support Slats: (40) 4" x 14 Ga
Max. Supported Material Load: 300 LBS / Sq Ft
Maximum Travers Speed: 500 In/Min
Pump Type: Omax Enduromax
Pump HP: 30HP
Pump Operating Pressure: 50KPSI
Electrical Requirements: 480 VAC ±10%, 3-Phase, 50-60 Hz Footprint
Electrical Requirements (No Controller): 18’0” x 12’2”
Weight (tank empty): 5,500 LBS
Height (with scissor plumbing): 8’10”
Operating Weight (With Water In Tank): 26,400 LBS
Weight (tank empty): 5,500 LBS
Height (with scissor plumbing): 8’10”
Operating Weight (With Water In Tank): 26,400 LBS
Omax PC Based Controller, A-JET 5-Axis Cutting Head, Maxiem Pump 30 HP
50KPSI Direct Drive Pump, Terrain Follower, Water Level Control, 600 LB Bulk Abrasive
Hopper, Abrasive Removal System and Under 2800 Hours Total Operational Time
***We strongly encourage personal inspection of all pieces of used equipment***
***All Price, Location and Specifications Subject to Change without Notice***
| Pump Output | 50,000 PSI |
| X-Axis Travel | 13.5' |
| Y-Axis Travel | 6.5' |
| Z-Axis Travel | 12" |
| Power | 30 hp |
X-Y Cutting Travel: 13’10” x 6’7”
Z-Axis Travel: 12”
Table Size: 16’1” x 7’0”
Material Support Slats: (40) 4" x 14 Ga
Max. Supported Material Load: 300 LBS / Sq Ft
Maximum Travers Speed: 500 In/Min
Pump Type: Omax Enduromax
Pump HP: 30HP
Pump Operating Pressure: 50KPSI
Electrical Requirements: 480 VAC ±10%, 3-Phase, 50-60 Hz Footprint
Electrical Requirements (No Controller): 18’0” x 12’2”
Weight (tank empty): 5,500 LBS
Height (with scissor plumbing): 8’10”
Operating Weight (With Water In Tank): 26,400 LBS
Weight (tank empty): 5,500 LBS
Height (with scissor plumbing): 8’10”
Operating Weight (With Water In Tank): 26,400 LBS
Omax PC Based Controller, A-JET 5-Axis Cutting Head, Maxiem Pump 30 HP
50KPSI Direct Drive Pump, Terrain Follower, Water Level Control, 600 LB Bulk Abrasive
Hopper, Abrasive Removal System and Under 2800 Hours Total Operational Time
***We strongly encourage personal inspection of all pieces of used equipment***
***All Price, Location and Specifications Subject to Change without Notice***
