9' x 20' Calypso LWA 9x20 Water Jet, Dual Head and Dual Ingersoll-Rand 50 HP Pumps, new 2008
Waterjets, Waterjet Cutting
Bridge Gantry X-Y Table: 9’ x 20’
Travel X axis (width): 109”
Travel Y axis (depth): 245”
Travel Z Axis (Tool): 8”
Park Area: Bridge parks completely out of the work area providing
complete clearance for loading material
Speeds:
Rapid Traverse: 1000”
Profiling/Contouring: 0.01 to 500”
Controller
Control Console: Industrially Hardened and Climate Controlled PC
Control Features:
● Nema 4 Enclosure – water and dust tight
● Mk4 Waterjet Control system
● PC based (Windows 10)
● Requires 20 amp single phase at 230 vac (+/-10%)
● External USB 4-port hub
● Wifi Capable
● Bluetooth Capable for Remote Operator Android App
Intensifier Pump HP: 50 HP
Operating Pressure: 60,000 PSI
Intensifier Type: “ESL”
Pump Output: 1.0 gal/min output in normal operation
Voltage: 480V
HP Pump
Pump Features:
● Pump control fully integrated to the waterjet control system
● Start/Stop/Estop
● Programmable Pressure Hi/Low/Auto
● Pump diagnostics returned to console
● Hydraulic Accumulator
● Improves high pressure water profile, making smoother cuts
● Improves life of hydraulic components by reducing pressure spikes
● Pump Protection Sensor Suite:
● Water Pressure low, Low Oil, High Oil Temp
Abrasive Delivery System
Supply: 600 LB bulk delivery hopper to automatically maintain abrasive flow
Metering Device: Programmable Digital Rotary Feeder Over the Cutting Heads
Abrasive Flow Rate: 0.25 Lb. per min to 1.5 Lb. per min
Calypso PC Based Controller System, NC Geomate/Console Operating
System, 50HP 60KPSI Intensifier Pump, Dual Head with Programmable Offsetting and
Mirror Cutting Capabilities, 600 LB Bulk Abrasive Hopper - Installation, Training,
Updated Software and Warranty Included (Buyer responsible for travel and
per diem expenses).
***We strongly encourage personal inspection of all pieces of used equipment***
***All Price, Location and Specifications Subject to Change without Notice***
Bridge Gantry X-Y Table: 9’ x 20’
Travel X axis (width): 109”
Travel Y axis (depth): 245”
Travel Z Axis (Tool): 8”
Park Area: Bridge parks completely out of the work area providing
complete clearance for loading material
Speeds:
Rapid Traverse: 1000”
Profiling/Contouring: 0.01 to 500”
Controller
Control Console: Industrially Hardened and Climate Controlled PC
Control Features:
● Nema 4 Enclosure – water and dust tight
● Mk4 Waterjet Control system
● PC based (Windows 10)
● Requires 20 amp single phase at 230 vac (+/-10%)
● External USB 4-port hub
● Wifi Capable
● Bluetooth Capable for Remote Operator Android App
Intensifier Pump HP: 50 HP
Operating Pressure: 60,000 PSI
Intensifier Type: “ESL”
Pump Output: 1.0 gal/min output in normal operation
Voltage: 480V
HP Pump
Pump Features:
● Pump control fully integrated to the waterjet control system
● Start/Stop/Estop
● Programmable Pressure Hi/Low/Auto
● Pump diagnostics returned to console
● Hydraulic Accumulator
● Improves high pressure water profile, making smoother cuts
● Improves life of hydraulic components by reducing pressure spikes
● Pump Protection Sensor Suite:
● Water Pressure low, Low Oil, High Oil Temp
Abrasive Delivery System
Supply: 600 LB bulk delivery hopper to automatically maintain abrasive flow
Metering Device: Programmable Digital Rotary Feeder Over the Cutting Heads
Abrasive Flow Rate: 0.25 Lb. per min to 1.5 Lb. per min
Calypso PC Based Controller System, NC Geomate/Console Operating
System, 50HP 60KPSI Intensifier Pump, Dual Head with Programmable Offsetting and
Mirror Cutting Capabilities, 600 LB Bulk Abrasive Hopper - Installation, Training,
Updated Software and Warranty Included (Buyer responsible for travel and
per diem expenses).
***We strongly encourage personal inspection of all pieces of used equipment***
***All Price, Location and Specifications Subject to Change without Notice***
